Quote:
Originally Posted by greg anderson
Hi- having restored 3or 4 ex army vehicles in my time in my opinion it is not necessary to sandblast -I would prefer a good wire brushing -what is left will probably be as good as anything you will put over it -also these were not Cadillacs so a prefect finish is probably out of place -I would suggest you use a two part primer and put the finish coat on within a couple of days or you should sand the primer - for the floor inside I used the truck box liner stuff with the paint so it is not noticeable but it stands up -I made a rotissery for my mutt which hooks to my hoist so I was able to roll it anound by myself -saved a lot of trouble -for a finish underneath I used Can Tire black tarry spray cans -I store the mutt in a shed so I hope it will tast forever-we are blessed here with back roads to drive these things -a necessity for full enjoyment - Greg
|
Hi Greg,
I have to agree, after a long thought about it, i've decieded against Sand Blasting this thing, and rather just lightly rough it up and paint it again. The only rust issues are easy to fix, and won't require drastic measures. Its never going to be a show winner resto, so taking it down to the bare metal would just accentuate its battle scars even more.
I managed to get mine up on 4 x 10 Ton Jack Stands so I can almost crouch under it now. Not too bad for working on it underneath, but still not as good as the old MUTT Kabob.
For the Tub Floors i'm thinking about brushing them down and doing the whole POR-15 process on it. I've seen others that have done it in the past on Jeep Frames etc, and it seems pretty sturdy and long lasting. Not sure about the underside yet. It still has most of the Ziebart Coating left on it, and although its protected it well, it looks like complete crap. Alot of dirt and grime is stuck to it. I'm going to try and at least get it cleaned up and degreased as best I can and re-assess.
What are the opinions on using JB Weld for very minor cosmetic touch ups? The sides where the Demil has been repaired might need a little bit of finessing and i'm not a fan a fan of Bondo.