CMP Light Breakdown Truck
 

Hi All

I have just updated my "WHEELS of VICTORY" site
with the Canadian Chevrolet Light Breakdown Truck.
Go to ;
http://www.wheelsofvictory.com/canadian%20index6.html

Regards
Ron Perry
ron@perry.nl

Great work Ron! Just in time; I was just looking some detail shots of the wrecker.


Alex

good stuff Ron. :)

CMP WRECKER
 

Hi all

Does anyone have any pictures of a holmes CMP wrecker or know someone who owns one, as i'm fitting the holmes gear on my chev and could do with some pictures to help.

Thanks

wrecker
 

HELLO RON
Can you tell me if the main upright frame rests on the chassis or clear of it in the middle its difficult to tell from your pictures we are fitting the holms wrecker to our chev but are not sure if they are the same fitting to the chassis as the Garwood i can see the large brackets each side but would like to know if the whole thing is resting on the chassis as well many thanks for all those photos we could do with some like that for the HOLMS .
REGARDS VIC EATON UK.

Hi Vic and Martin,

I took some pictures of a Holmes equipped example in Arnhem last year. Hopefully you will find the answers in the following pics.


Alex

-

--

---

Here is a picture of the actual truck.

Alex

Holmes drawings
 

Hi Victor

As Alexes pictures show, the Holmes unit was bolted to the chassis with flanches and U bolts.
I have updated the Diamond T part just now because I thought I just point jou to it, but when I checked it was not there yet.
So, now it is and when you scrol down there are some HOLMES drawings that may explain it all - I hope-

Go to http://www.wheelsofvictory.com/canadian%20index6.html
go to Diamond T and scroll down.

Hope it helps.
Regards
Ron Perry
ron@perry.nl

wrecker
 

HELLO ALEX AND RON
Many thanks for the pictures ect looks like we are going to have to make some fittings to hold this lot down
regards vic and martin eaton uk.