MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)
-   -   Horn button (http://www.mapleleafup.net/forums/showthread.php?t=4936)

Jordan Baker 14-11-05 04:32

Horn button
 
1 Attachment(s)
Hi everyone.

SInce I have gotten my horn working on the carrier Im now in search of a horn button. My instrument panel has the hole for the button. Does anyone have any clear pictures or what one would look like.

Jordan Baker 14-11-05 15:25

Thanks Brad.

I will look into it.

Richard Notton 14-11-05 21:13

Quote:

Originally posted by Brad Mills
Jordan,

I think the horn button is like the Lucas one's used in the Airborne Jeeps. I may be wrong on this, but they look the same and are the right vintage.

Also Paul Beck does this stuff new, see:
http://www.vintagecarparts.co.uk/

R.

Bruce Parker (RIP) 14-11-05 22:35

Holes
 
All Mk.1 Carriers have the hole for the button on the dash. Only on later ones there was no horn button in it.

BIG MIKE 15-11-05 01:55

new Brake parts
 
Just bought a pair Brake hardware from Dave Demorrow, part #CGB1926, these are custom made of hardened steel and treaded in british thread , I noticed mine were cast and one was cracked, so these are a must if you don't have a good pair, I believe Dave still has a few pairs left, he's at alleramilitaria.com or on this forum.

CHEERS


BIG MIKE

Jordan Baker 22-11-05 02:33

Hi everyone

I won one of the Lucas Horn buttons on ebay. I found an English part supply place on the net that sold these and other vintagish parts. They listed the buttons at justunder 16 GBP plus shipping. Mine with shipping was 18.5 GBP. I will let everyone else know how they fit.

The website for the parts is

http://autoelectricsupplies.co.uk/index.php

derk derin 22-11-05 08:45

carrier horn button
 
Quote:

Originally posted by Jordan Baker
Hi everyone

I won one of the Lucas Horn buttons on ebay. I found an English part supply place on the net that sold these and other vintagish parts. They listed the buttons at justunder 16 GBP plus shipping. Mine with shipping was 18.5 GBP. I will let everyone else know how they fit.

The website for the parts is


http://autoelectricsupplies.co.uk/index.php

I have an old instrument panel off of a mk 1 carrier packed away somewhere in my junkpile I recovered this fall off of an old carrier in northern Manitoba.I will look for it tommorow and find somebody with a digital camera to take a picture of it and post it for comparison with the new ones you are finding. Derk.

rob love 08-12-05 15:58

It's a little late for a reply to this thread, but here goes anyway. I have a photo of Derks control panel. The button is very similar to the Lucas ones you guys have shown, except the actual button portion is actually steel, as you can see by the pitting.
http://img.photobucket.com/albums/v2...r/Dscf0056.jpg

The button still has it's spring action, and appears as though it can be dissassembled and cleaned up.
The panel is a nice find. It also has all three of the origional light switches at the top. They are an interesting open knife type switch in the back.

See, there are advantages to living in this deepfreeze called Manitoba. Things stay reletively preserved here, even when stored outdoors in a swamp.

BIG MIKE 08-12-05 18:31

Geez when can BIG mike come over to see and buy everything?, you guys are lucky to have each other close you . I have to scower the earth looking for parts and such and look at pictures. anywho my bro inlaw just senr me a case of Keiths beer , mm i'm loveing it!!


CHEERS

so to be in Drunken stupper BIG MIKE

BIG MIKE 08-12-05 18:31

Geez when can BIG mike come over to see and buy everything?, you guys are lucky to have each other close you . I have to scower the earth looking for parts and such and look at pictures. anywho my bro inlaw just senr me a case of Keiths beer , mm i'm loveing it!!


CHEERS

soon to be in Drunken stupper BIG MIKE

BIG MIKE 08-12-05 18:32

see i'm seeing Double, just like Jordan said LOL

rob love 08-12-05 20:14

Quote:

Originally posted by BIG MIKE
Geez when can BIG mike come over to see and buy everything?, you guys are lucky to have each other close you .
Mike
There is nothing close about any of us in Canada; you are likely closer. Brad is over 2600 miles from me, while Jordan and the Ontario guys are likely around 1400 miles or so. Besides, if BIG MIKE is drinking his Keefes, he is advised to stay home, it's too damn cold up here to have a big guy wandering around.
Quote:

Originally posted by Brad

Did he happen to mention to you anything about the Grenade box inserts?

Brad
I'll head out to the garage and see if I can locate my best one. I know one box still has the felt as well as the wood.

Rob

BIG MIKE 09-12-05 03:15

I'm confused , ware is Dirk located Holland or Canada? and ware is shilo, maitoba, and how cold is it? i do ware a nose glove when it gets cold down here,lol i had 5 keefes aready at 5 pm, BIG MIKE >slipping of the chair<



WANDERING

rob love 09-12-05 05:37

Mike:
Derk Derin is out of Winipeg, which is just next door to Shilo Manitoba (only 100 miles away). Manitoba is located above North Dakota/Montana. Dirk Leegwater is somewhere on the other side of the big lake next to Newfoundland.
I'm afraid I have been fairly thoroughly converted to the metric system, so the temperatures here have been between -24C at night, up to a high of about -13C in the heat o fthe day. You'll have to find a conversion chart to figure it to F. And winters not even here yet; we only have a few inches of snow on the ground.

Dirk Leegwater (RIP) 11-12-05 14:28

Quote:

Originally posted by Brad Mills

The switch is made by Lucas so perhaps it is the right one...but...perhaps a long shot. I need one as well as I have the early inst. panel and my front armour has the hole for the horn. Hopefully someone else here on the Forum can shed some more light on the subject.


http://i5.photobucket.com/albums/y16...944/5d_1_b.jpg

Hallo Brad,

The dashpanels of my (unrestored) MkI carriers are two diffirent types,
look to the pictures. In my opinion are the Lucas horn buttons to big (wide).
Looks good, but you must make a new extra hole, I guess.

Mvg. Dirk

http://lwdparts.dominodeveloper.net/...ornButton1.jpg


http://lwdparts.dominodeveloper.net/...ornButton2.jpg

derk derin 14-12-05 06:58

Quote:

Originally posted by rob love
Derk Derin is out of Winipeg, which is just next door to Shilo Manitoba (only 100 miles away). Manitoba is located above North Dakota/Montana. Dirk Leegwater is somewhere on the other side of the big lake next to Newfoundland.
I'm afraid I have been fairly thoroughly converted to the metric system, so the temperatures here have been between -24C at night, up to a high of about -13C in the heat o fthe day. You'll have to find a conversion chart to figure it to F. And winters not even here yet; we only have a few inches of snow on the ground.

This is the first time somebody has had my name confused with another person! With the name Derk,it hasn't happened before.
Hopefully with the same name as Dirk,I will automatically have the same talent for restoring C.M.P.'s as Dirk!What do you think Derk.........uh I mean Dirk?

BIG MIKE 14-12-05 11:24

Derk,I don't think I was confused on Dirk, Derk. Dirk L is who I was talking about, BUT Derk do you have anything to sell in UC parts? You may have the TALENT ! probley more than me :)

Cheers

BIG MIKE

c. ladouceur (RIP) 21-02-06 22:55

Two styles of panels.
 
It would appear if there are two styles of panels, then there are likely two different buttons. One seems to mount on the surface,(both of mine are like that-no large hole between the screws),and one mounts through the panel-with the screws going back through the panel and screwing into the button base.
Does anyone know if this is so? Maybe the large centre hole was drilled only if a horn was actually mounted?

Richard Farrant 22-02-06 00:08

Re: Two styles of panels.
 
Quote:

Originally posted by c. ladouceur
It would appear if there are two styles of panels, then there are likely two different buttons.
The picture of the panel on Jordan's initial message on this thread, is of a British panel. It has a speedo and oil guage made by Smiths Motor Accesories, switchboard by CAV, oil guage by ARIC (Accurate Recording Instrument Co.). So it would be very likely that the horn button is Lucas, as has been shown. Some Lucas switches and fuseboxes of designs dating to the late 1930's are still produced by them or were up until recently, the horn switch being one of them.

Richard

Jordan Baker 22-02-06 00:32

1 Attachment(s)
The picture I orginaly posted came from the following manual. I think it is the Cdn reprint of the British one.

BIG MIKE 23-02-06 01:16

Jordan , Personal question here , Do you have a Female whoo Toot's your Horn or is your Gal the UC? LOL Cheers HOMIE




BIG MIKE


All times are GMT +2. The time now is 06:27.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016