MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)
-   -   unusual door interior pattern (http://www.mapleleafup.net/forums/showthread.php?t=4548)

cmp_uc_guy 04-09-05 17:48

unusual door interior pattern
 
1 Attachment(s)
Hi everyone,

Can you tell me what the unusual recess in this CMP door is for?!? I'm Stumped.

Rob

Rob Fast 04-09-05 18:25

Oil Lube data plate location C8A???
 
Just a try. Cheers Rob

Keith Webb 04-09-05 18:50

Verrrry interesting!
 
The only comment I can offer is a paralell development in Australia where there are some double skinned doors in existence without any pattern at all.
I have one of these (NOS) in my collection and have always assumed these were made post-war as replacement parts, and are possibly without a pattern because the original presses had been destroyed.
But in the case of your door I don't have a satisfactory explanation. Possibly it was another of the prototype designs?

cmp_uc_guy 04-09-05 20:42

door
 
There are some mounting holes there for some sort of plate, Its a ford so I suppose the small upper extention of the recess is for the data plates.

Thanks for the help guys.....anyone else?

Rob

Harry Moon 05-09-05 00:40

The recess is for a metal schematic of iether the electrical system or the same in a lubrication chart. My C15A had the wiring diagram in the drivers door, but I have seen both plates although they were not attached to a vehicle at the time. The Build date on my C15A was July 20 44. I have pics I'll try to scan and Post.

cmp_uc_guy 05-09-05 03:14

Plates
 
Harry

Thanks very much, and hope you can post those pics.

Rob:salute:

Harry Moon 05-09-05 04:30

Found them and got the scanner working. The top one is a lubrication chart of of a C60 The bottom one is more universal and is the one I found on my door, unfortunatly mine had been painted over and while I tried to just remove the over paint it also burned off most of the printing. It still shows as the process resulted in a sort of raised etching. I haven't found a similar door and I do need a right side door fopr My C60L .
http://www3.telus.net/public/hmoon/doortags.jpg

Jon Skagfeld 05-09-05 06:13

Quote:

Originally posted by Harry Moon
The recess is for a metal schematic of iether the electrical system or the same in a lubrication chart. My C15A had the wiring diagram in the drivers door, but I have seen both plates although they were not attached to a vehicle at the time. The Build date on my C15A was July 20 44. I have pics I'll try to scan and Post.
Harry:

My build date was 13 Jun 44.

Perhaps yours and mine were part of the same LV Contract?

Harry Moon 05-09-05 06:24

Should be LV 2571 I've got another parts truck C15A wire 5 built the same day (june 13 44) as yours 3844438273 also Pat Papworths is also the same day about 20 #'s earlier than mine. Did you have the same door pattern?

David_Hayward (RIP) 05-09-05 10:43

CDLV 2571 known to me:
 
3844338206 ENGINE # PR3,978,466 ORDER C.D.L.V. 2571 JUNE 13 1944
3844438220 ENGINE # PR3,978,595 ORDER C.D.L.V. 2571 JUNE 13 1944
3844438249 ENGINE # PR3,978,589 ORDER C.D.L.V. 2571 JUNE 13 1944
3844438262 ORDER C.D.L.V. 2571 JUNE 13 1944
3844438269 ENGINE # PR3,978,636 ORDER C.D.L.V .2571 JUNE 13 1944
3844438273 ENGINE # PR3,978,477 ORDER C.L.V. 2571 JUNE 13 1944 [WIRE-5]

These could both be CDLV 2572:

3844438115 ENGINE # PR3,978,697 ORDER C.D.L.V. 2572 JUNE 12 1944
3844438177 ENGINE # PR3,978,481 JUNE 12 1944


All times are GMT +2. The time now is 18:45.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016