WS19 Set to Larkspur J2 box - Connector cable
 

Hope someone can help

I am looking for the cable which goes between the WS19 radio and the J2 junction box for the Larkspur system.

The cable is called - Connector 12 point. No 86. 5ft. Type E. ZA47092

If anyone has one for sale please let me know.

Worst case if anyone knows the pinout for the cable, I can consider making one.

Many thanks

Tim

I'll have a look. I do have some of those cables in various lengths (used during the switchover from WW2 to the "New Range" of sets. The 12-way Pye connectors are not always fully populated as the 'B' set (and possibly the IC amplifier) was not used. (Also the WS19 IC amplifier was sometimes repurposed as a tone generator for the 150 Hz squelch in the NewRange sets - and the switch was painted red to indicate this.)

If all else fails, a 12-way extension cable and Pye connector will do the job.

Best regards,
Chris.

Chris

Thanks for the info - and appreciate the support!

Cheers

Tim