Chevrolet c15a no12 cab
 

Hi Guys,

Looking for information on hood bows (height, layout ie any horizontal bars) for my Chevrolet c15a that I'm restoring. Also rear mudguards.Attachment 122624

Appreciate any assistance.

Cheers,

Paul

Paul,

See some info here: Top Bows - 15-cwt truck

HTH

Hanno you are a star!

Thanks,

Paul

Post #10 here shows a picture of the rear mudguards on a C15A cab12:

http://www.mapleleafup.net/forums/sh...hlight=mudflap

Note: rubber mudflaps on 11 and 12 cab trucks.

Hopefully someone can provide input on the 'metal' part of the mudguard! :coffee

Owen.

Cheers Owen that's very helpful.

I assume the metal part of the mudguard is just flat plate, would this be bolted or welded back to the tub?

Cheers,


Paul

Here's a photo of my rear arch. I'm guessing the metal mudguard is fixed back to the raking bulkhead of the tub.

Thanks for any assistance.


Paul

I will see if I can take a picture of my F15A with the same rear body later today

Thank you Niels, much appreciated.

Cheers,


Paul

It was to dark in the barn yesterday when I arrived to get good ones but I do have these old pic that might help a bit

Thanks,

Beautiful truck Niels, did you restore her yourself?

Regards,

Paul

What a beautiful truck!
Thanks for sharing Niels :thup2:

No I cannot take credit for this, it was restored in the eighties by Tony Sudd

Awwwww quality if Tony Sudds.

When you get time could you send me photos of your hood bows?

And while your there any chance of photos of your engine compartment?

Cheers,

Paul

Hi Paul sadly I dont have the hood bows and the engine compartment would give you much, as mine is a Ford Cab 11