MLU FORUM - Wanted: C15a Parts

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- For Sale Or Wanted (http://www.mapleleafup.net/forums/forumdisplay.php?f=15)

- - Wanted: C15a Parts (http://www.mapleleafup.net/forums/showthread.php?t=28177)

Hi,

I am looking for the end cap for C15a Master Cylinder.

I am also looking for a throttle pedal.

Thanks in advance Chris

Picture of my master cylinder.

For the master cylinder outlet end cap, I believe I've seen them aftermarket but don't remember where right now. I don't have the parts book with me but if you have it, a search on the part number has frequently produced results for me when I haven't been thinking the same name for a part as the seller.
For the gas/accelerator/throttle pedal, there were both rubber covered and bare metal used according to the parts book. The rubber covered one was a civilian part, off the shelf. I had luck finding one on ebay but don't remember what it was sold as fitting... so that's not a lot of help to you. The two pedals mount in the same way to the floor but need different 1st parts of the linkage. (rubber pedal takes a ball end and the metal a 90 degree bend and cotter pin)

Thanks Grant. Unfortunately I don’t have a parts book. Something I need to rectify.

Chris

I do make reproductions of the C15A-04 parts list (also the MB-C1, MB-C2 Maintenance Manuals and Service Bulletins applicable to the Chevrolet CMPs). There are other suppliers of reproductions as well, some in Europe so the postage might be less. If you would like to discuss purchase of a repro print, please contact me by PM.