Lever, clutch control
 

Was someone looking for a clutch lever? Part number TL 2731/CTL 2731. In FUC-03 at illustration 33. Page 183/desc page 182.

Yes!
 

Hi Michael,

Yes, I could use one! Mine is to short and therefore the clutch goes extremely heavy and it also interferes with the engine stay rod. I do not have a FUC-03 on hand but this is the one on the transmission?
Have you got it yourself? And how much do you want for it? Please PM with details. Thank you.

Cheers,

Hi Michael,
I was after one a while back but i made one in the end. I am about to start work on Ricks carrier and that does need one ( he has the same as Marc at the moment , a short one) so if Marc does not need it, can i have second dibs on it please.
TTFN
Shaun

i have a genuine one which has been cut but its complete if it is needed for patterning ? let me know and i will get it dunked in the mollasses to free up the end :)

i take it that its the cast arm you are talking about ? i welded mine back together good as new...I also have the linkage rod setup too if it is needed as a pattern

Lever
 

A portion of Illustration 33 from FUC-03 showing TL 2731 / CTL 2731.

hi michael
thanks for the illustration i've sent you a pm

cheers

rick

clutch lever
 

Replies sent to Private Messages.