Chev Master cylinder return spring
 

Guys I am looking for a Chev master cylinder return spring the one inside the master cylinder,Mine was almost gone to dust and a new one does not come with the rebuild kits, Any one have one or any ideas as to something that can be used?
Thanks jason

Which Chev?
 

Hi Jason

If you are talking Chev CMP master cylinder spring. It is a standard 1939-1946+ Chevy part. If the bore on your master Cylinder is good then a many rebuild kit can be had from most parts houses. Try NAPA UP3 shows the master cylinder kit with spring.

Cheers Phil

Ok Phil, I just ordered a rebuild kit this afternoon from napa along with two wheel cylinders...I was very surprised with the cost of the large wheel cylinders as they were cheeper than 3/4 ones for my GPW.
For some reason I had it in my head that the spring dident come with the kits.
Well one last thing to do, Now to try to round up a seat or more.

Wheel cylinders
 

I found this site by accident it is most informative on wheel cylinders.
This link is for the rear cylinders only but it has most WWii era brakes bits listed.

http://www.nsn-now.com/Indexing/View...=2530007371894