Unknown tail light bracket
 

Trying to ID what vehicle this bracket was used on. It fits two of the standard CMP side marker/tail/stop lights. The white/red tags look like the same style as used on the Mk2 Universal Carrier. There is no other markings on it at all.

Any help would be most appreciated.

same same CMP Jordan. Never seen this part before but it's obviously designed for pre-existing hole pattern, which points to chassis frame somewhere - perhaps CMP rear crossmember? Should be possible to ID by hole centre measurement.

Attachment 79596 Attachment 79597

Yours looks like a redback spider's nest Tony!

Very likely Keith - best not to disturb!

Attachment 79621

BTT - anyone know ??

Still waiting on measurement (see my post above)

Hi Tony,

The hole center difference is 3 3/4" or 95mm.

Brian

Unknown tail light bracket
 

See picture in post #1. Anyone know ?

Brian

Unknown tail light bracket
 

bump -

See picture in post #1. anyone? any ideas?

Brian

Hi Brian,

I have the same bracket (see picture), unfortunately without part numbers,
I have a bracket with the same kind of mounting and excactly the same hole center distance, but a different style for lights.
It has the part number C11AS-13470 on its, which directs to a car or utlity vehicle on a 114 inch wheelbase.

Hope this helps a bit.

Have a good flight!

Stefan