carter w1 main jet# for 216
Anyone would happen to know what is the main jet # for the carter W1 for a 216 ?
some morron welded stuff in ours and drilled it back and i cannot read the size number anymore so that complicates a bit the "rebuild" of the carb... i found several diagrams and various info but nothing specific to the # jetting fwiw i have a 69-44 rod so its the "standard" one, not the leaner one. at last if i could get a picture of one not welded and the diameter of the orifice i could probably fix it properly... thanks for any info. |
|
Which W-1
1 Attachment(s)
Hi
Glad you found the information you were looking for, a question which W-1 do you have the early or late? One has a tin top (carb on the left) the other (carb on the right) has a cast pot-metal top. A quick look at the carb sheet link you posted, I didn't spot if there was a difference depending on the application car vs heavy truck. Also going to the part sheet what number part were you looking for? Cheers Phil |
hi, i have the one with the metal cover and stamped 365 under the casing.
among the 3 or 4 manuals i found like the one in the link, they all refer to a 0,095" diameter orifice of the main jet. there is no pn found for that jet specifically so i fabricated*one. works like a champ. |
Hi, I have a reconditioned Carter W1 ready to fit complete, Want £150 for it, I am located in the uk.
kevin. |
Quote:
regards. |
All times are GMT +2. The time now is 09:09. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016