Carburettor information Solex S1450 wanted
 

Hi all,

I need some information regarding my solex carburetor fitted to my flat head V8. I was told that the Brengun carriers have a flathead fitted so thought some one in the group may be able to help.

It is a twin choke carb, model no. S1450

Does anyone know were I can get a full set of spares!!

I could also do with a parts drawing and knowing the full spec of the carb.

All help gratefully received.

Bryan

Re: Carburettor information
 

Bryan,

Regarding your Solex carb, the number quoted is the Specification Record Number ( S.1450 ). The Model No. is 30AAPI and I can give you the following details on it;
Choke 25
Main Jet 110
Correction Jet 200
Pilot Jet 55
GA Jet 5.5
GS Jet 145
Speed Jet 60
Well 6 mm
Jet Assembly 21
E. Tube or Jet cap 52043

Originally specified for Fordson Thames truck 1947/50

If you are in the UK, try Carburettor Exchange at Leighton
Buzzard, Beds. www.carbex.demon.co.uk

Richard

Treadwell Carb in NY State
 

I had excellent results with Treadwell. I sent them the hulk of the single barrel carb original to the carrier, including the govenor, and they totally rebuilt it. Even the Govenor.

Then, then put it on a V8 test motor and set up the adjustments.

All for $98.00 USD

http://www.carbsandkits.com/tc/treadwell.html

They also have European makes.

They now know what a bren carrier is if you ask them!

Cheers,
JIm

Re: Treadwell Carb in NY State
 

Now I think Bryan means one of these - attached. The spec here says its the 100hp engine so probably doesn't have the single barrel carb, velocity governor and manifold adaptor, which incidentally Ballard had (or did have) brand new in the sticky sealing paper stuff.

R.

New website of Carburetter Exchange
 

An update from the owners of Carburetter Exchange:

That is not a carrier carb, or at least not the one used for the British Universal Carriers. I can check the proper model designation if anyone wants it.