MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)
-   -   kit locker box detail (http://www.mapleleafup.net/forums/showthread.php?t=20389)

kevin powles 06-06-13 01:17

kit locker box detail
 
1 Attachment(s)
Hi, Has anyone got a close up picture of this bracket which go's on the kit locker box, I have made the bracket from an original which I have now returned. I need to drill the holes but did not mark which way round it's mounted (the bracket is not a square with equal distances, does it sit long ways or is the longest part upright)?. help! :giveup

Michael R. 06-06-13 05:40

TL 13034 Socket - lifting jack, small Chilwell 63/76
 
4 Attachment(s)
Long side upright. i.e. 1-5/8 inch length upright. The 1-3/8 inch length with two 1/4 inch bolt holes is fitted against kit locker lid.
Known in FUC-03 as Socket - housing stores.
Look in Nigel Watson's Book #1. An excellent photo with the socket exposed to view on "Maid Marion", a named MKI carrier mounting the kit locker over the forward lifting rings above the glacis plate .

kevin powles 06-06-13 09:24

Hi, Many thanks for that, I can now crack on and fit them today..............like I said you are the man, any idea what went through the large hole, 3/8" retaining pin?.

Many thanks kevin

kevin powles 14-09-13 12:24

KIt locker box
 
1 Attachment(s)
Gents,

I want to mount a long kit locker box in a mk1 carrier, does anyone have the dimensions of the packing pieces which it mounts on, I am guessing they are the same thickness as the angle iron, would there be three strips along the the mounting holes?.

kevin.


All times are GMT +2. The time now is 09:26.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016