MLU FORUM - Fuel tank switch over?

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- The Carrier Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=6)

- - Fuel tank switch over? (http://www.mapleleafup.net/forums/showthread.php?t=31350)

carrierbarry

21-07-20 19:32

Fuel tank switch over?

1 Attachment(s)

I,m being a bit thick . Can anybody tell me the thread size on the fuel tank switch over.? .thought it was 1/2 unf. But mikes up a bit to big.
:fry:

RichardT10829

21-07-20 20:05

BSP matey...

I put O rings in that assembly when I rebuilt mine, for better for worse !

Ron Pier

21-07-20 20:06

Mine are 1/4 BSP. .518"

Ron

Michael R.

21-07-20 22:42

Quote:

Originally Posted by carrierbarry (Post 271066)

I,m being a bit thick . Can anybody tell me the thread size on the fuel tank switch over.? .thought it was 1/2 unf. But mikes up a bit to big.
:fry:

see....

http://www.mapleleafup.net/forums/sh...0&postcount=75

http://www.mapleleafup.net/forums/sh...7&postcount=85

and YES! Your spring is missing, although the tab is present.

carrierbarry

03-08-20 15:45

Fuel assemblies

Thanks guys.
I have the spring just need to work out where it goes.
Barry

Michael R.

03-08-20 16:00

1 Attachment(s)

Attachment 115251

Quote:

Originally Posted by carrierbarry (Post 271277)

Thanks guys.
I have the spring just need to work out where it goes.
Barry

The pin used to connect the change over arm to the bar is normally retained with a cotter pin (split pin ?). Insert the pin from rear to front. The long hook of the spring acts as the cotter pin. The opposite end through the hole in the stand off...

carrierbarry

10-08-20 18:57

Thanks

Thank you Michael

You guys on this forum are amazing.

All times are GMT +2. The time now is 07:08.