MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   The Wireless Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=29)
-   -   19 set spare parts (http://www.mapleleafup.net/forums/showthread.php?t=30562)

Alastair Thomas 15-10-19 22:28

19 set spare parts
 
2 Attachment(s)
In 1992 I bought a 1934 car from a barn in which were stored about 40 of the same sort of vintage. The seller had another barn full of spare parts and I took the opportunity to stock up.
Among the items was a tin with useful, difficult to get hold of, bearings and this has sat on my shelf ever since and has yielded up many useful bits for the cars.
Recently I succumbed to the "green disease" and bought a Lynx I MkIII* and was introduced to the No19 set therein.
Needing a bearing today I went to the tin and noticed that it is a spare parts tin for a No19 set. Serendipity strikes again.
I note from the Lynx workshop manual that a spare parts tin for the No19 set should be carried but I already have one and it is not the same as this one.
Is this one a base spares tin?
Also I notice that listed in the inside of the lid are the contents and they have two identification numbers: the second is headed "W.D. No" and the first is headed "EKC No". Am I correct in interpreting this to refer to E K Cole, the manufacturers of EKCO radios?

Bruce MacMillan 16-10-19 08:01

I believe you are correct. EK Cole was a manufacturer of the 19 set so it makes sense they also made spares available.

tankbarrell 16-10-19 08:35

Spare parts tin 5c is certainly the correct and standard one, what does your other example look like?

Chris Suslowicz 16-10-19 14:23

It's interesting that there are no spare brushes for the supply unit listed and the flick clamping screws have been reduced from four to two, I suspect this may be a later issue of the case.

Chris.

Alastair Thomas 16-10-19 15:44

Spares box
 
2 Attachment(s)
The spares box that came with the Lynx is as illustrated below. It is for valves and in the legend, centre bottom, someone has handwritten "Transistor". If this is original it definitely dates the box to well after WWII.
Alastair

tankbarrell 16-10-19 18:27

That's the spare valve case, obviously! Normally, vehicles carried both spare valve case and spare parts case.

Bruce MacMillan 17-10-19 08:30

Quote:

Originally Posted by Alastair Thomas (Post 263953)
The spares box that came with the Lynx is as illustrated below. It is for valves and in the legend, centre bottom, someone has handwritten "Transistor". If this is original it definitely dates the box to well after WWII.
Alastair

This box is the spare valve box for the Larkspur era SR C12 so certainly post war. The set was initially supplied with a vibrator supply but a later transistorized unit was provided. That would account for the handwritten "transistor" where the vibrator would have been.

Alastair Thomas 17-10-19 09:35

Vibrator
 
Are the transistorised vibrators still available? That would solve an ongoing problem with period car radios.
Alastair

Bruce MacMillan 17-10-19 10:08

The vibrator wasn't transistorized, the whole power supply was.

There are drop in solid state replacements available for common vibrators.

Check out this site:
http://www.royalsignals.org.uk/vibs/index.html

Alastair Thomas 18-10-19 12:42

Thanks
 
Thanks a lot Bruce. That is really helpful.
Alastair


All times are GMT +2. The time now is 12:06.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016