Wiring help
 

Does anyone know where I can get the wiring for making up wiring looms for my 1940 Fords? There is someone I believe who can make up harnesses with the correct coloured wires but I would like to do it myself and need to source the various coloured wires. Any help much appreciated.

Nigel

Wiring
 

Nigel

Auto Sparks will do cotton covered UPVC cored wiring and all the bits and bobs of ends and things, bit expensive mind.
Tel 01602 497211, they may well have a web site now.

Agent 'O' found a firm that made him a first class harness for the C30 at a very fair price. If he dosen't post here I'll ask next week for you

Pete

Re: Wiring
 

Nigel,
I can highly recommend Auto Sparks, they made me a harness for a Bedford MW with cotton covered UPVC cable as Pete described, and asked if I needed any extra cables included, of which I required flasher and stop light. The whole lot came out cheaper than you could make it because it is finished off as original and fitted perfectly.

Check their website;
www.autosparks.co.uk

Richard

Sparks are flying
 

Brilliant guys, many thanks for that info, I was beginning to think I would have to send to US for them and then pay all that shipping.

Will let you know how I get on.

Thanks again
Nigel

Re: Sparks are flying
 

Best to get a new replica if you can Nigel. Ballard had a NOS harness from Wally at Nordian Svcs before they sold the stuff off and I've had to chase several faults for him as these have probably got damp sometime over the years of storage and the conductor strands have blackened causing poor or no connection at some of the end terminations.

R.

Also see Keith Orpin's thread "Wiring Loom" on the Old MLU Forum for another UK-based firm.

Wiring Loom
 

Nigel, try this one.
The Wiring Harness Co,Derby, England ( I think he may have a website also)
Tel 01332 810052, speak to a guy called Peter. Very helpful and as Pete A said, he made an excellent wiring loom for my Chevy, with all the correct coloured outer braiding and ends (£140 approx 2 years ago)
Keith

This looks like it: http://www.thewiringharness.co.uk

Jonathan Lewis

Nigel,

where you able to get in touch with the wiring harness company? I sent them a message about a harness for a F15 15cwt and never heard from them. I also tried Harnesses of Maine, but never heard from them either!

Jonathan

Reply
 

Jonathan I did speak to them by phone and they were really helpful. Am sending them down my old tattered harness for them to copy, so we'll see how it turns out.

Have discovered some interesting alterations to the original wiring harness on my SA trucks since they were right hand drive. The harness is different from the left hand drive trucks.

Nigel

Re: Wiring help
 

Hallo Nigel,

Have you missed the nice wiring looms last Beltring ?
The LwD shop has in stock, brand new wiring looms
"Ford C11ADF" N.O.S. in a perfect condition !
Part number C11ADF-14401B

Mvg. Dirk


http://lwdparts.dominodeveloper.net/...ringC11ADF.jpg

I just heard from Joe and they do not reproduce them yet.

Jonathan

Another quality source for looms..
 

...is located in Australia.

www.vinwire.com.au

Also, Dirk, I have been having troubles over the last few months getting e-mails to you. Do you have any dash switches available separately? I don't have separate numbers for them.

Has anyone been able to get in contact with Dirk Leegwater? I have been trying to for about a week, through his site and this one, e-mails, pm's, etc.

Jonathan