M38A1 Fording Kit
Does anyone have more info on the M38A1 fording kits? I've recently acquired the hood/fender/rod brackets and would like to get one together.
Were they in use by us or only the americans? Any in-service pictures? I'd specifically like to find a CFTO or any instructions and would be very grateful if anyone has measurements for the long rod that attaches to the side of the cowl to hold the snorkel hose. Thanks, Rick |
fording kit
Hi Rick , what is the year of your M-38A1 ? the tailpipe needs to be modified to fit a cdn 2 or 3 due to the tail light being mounted outside of the body,
regards Frank |
M38A1 fording kits
M38A1 fording kits I have seen come surplus from the Canadian army were standard US kits. A 4-page installation pamphlet was included. It shows the measurements for the installation locations. PM me if you want a copy. I have extra exhaust stacks, boxes of all the mounting hardware (clamps, exhaust pipe holder, nut bolts etc.) but no support rods, or flexible intake hoses. ...... Brian
|
fording kits
(In my humble experience) The fording kit was never issued down to the units - especially the reserve regiments. Heck, even the cutoffs were safety wired in the disengaged position. And, after years of abuse followed by just-in-time maintenance, I doubt anything would have been actually watertight.
|
Hi Frank, Its a '67. CFR 67-08079
Cheers, Rick |
All times are GMT +2. The time now is 02:33. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016