Cage nuts
1 Attachment(s)
Anyone know if a source for original style cage nuts? These are found on the nose of the Cab13 Chevy trucks.
|
Hi Jordan. I bought some from a company in Calgary called Bolt Supply House. Ill check the details when I get home to see if I have a reference number or brand. What size are those?
|
cage nuts
Macs auto has them in any size I ever needed.
|
Facca here in London has sold me 1/4 and 5/16 but they are NC and the original CMP ones were NF. I settled for NC.
|
Wide variety of sources then and now
Hi Harry
Over the years I've seen a wide variety of cage nuts used on CMPSs and I've have the suspension that they used what they could get. So what I did was tried to match what was there. Failing that I replaced all the caged nuts in a particular area to match. When you are looking remember to look for the bulk suppliers you may find as I did suppliers will sell you 100 for the what other sources will charge you for the 8 you need. I had lots left over, but is sure nice to open the box and pull out 5 of the 1/4x20 caged nuts when your fabricating something that needs a blind fastener. Cheers Phil |
3 Attachment(s)
Thanks, ive looked at the sources listed and nothing like these ones.
These ones go into a square hole on the nose, then there is 4 little tabs that fold over. On the backside the square nut is held by 4 tabs. As for the thread. The originals that ive got were 1/4" NC This is what the modern ones look like compared to the picture with the ruler of what the originals looks like. |
3 Attachment(s)
These are the ones o bought for the floorboards in my M38A1 (1/4” NC).
There are a couple of numbers on the sides. See photo. After thinking about it further, I may have purchased them from a company called Foothills Fasteners in Calgary. I seem to remember them being ordered in for me. |
thanks Wayne, but those are the modern ones. Hopeful to find the older style ones I posted in the picture with the ruler.
|
I think they are captive nuts as opposed to cage nuts. I found some on a website here but you had best be sitting down: http://www.thelongolivedrabline.com/...-nut-14-20-nc/
http://www.thelongolivedrabline.com/...c-front-floor/ I tried looking at the online spaenaur catalogue, but I hate online catalogues. I had an old hard copy of their catalogue at one time...wish I knew who I gave it to. |
cage nuts
|
different nomenclature
|
1 Attachment(s)
Macs and Spaenaur do not appear to have them.
I see Peter Debella Jeep parts does have them. Although at $6.00 USD each they add up. https://www.debellajeepparts.com/CJ2A_BODY_CATALOG.htm Now to find the main supplier. |
So it seems like Joes Motor Pool in England is making them. RFJP.com is selling them. Some have been ordered. Thanks all
|
All times are GMT +2. The time now is 09:31. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016