WS19 mounting frame #21 and further Aerial info
1) I'm looking for a #21 mounting frame for a WS19, any condition acceptable as long as reasonably complete.
2) Also looking for either 4 guy rope assemblies for the Canadian 34ft aerial, any condition, or photos or good dimensioned sketches of the triangular wooden blocks on the ends of the guy ropes, showing how the ropes are fed through the holes in the blocks. 3) Copy of an instruction book for the 34ft aerial. Ottawa, Canada |
more
5 Attachment(s)
I had a original 19 set frame . I have the drawings , or sketches I did , Is the # 21 the normal frame ?
|
more
4 Attachment(s)
...............................................
|
1 Attachment(s)
John. I’ve got a few sets of the shock mounts that the tray requires.
$115. If anyone else is looking for a set send me a msg. |
Quote:
Thanks for the info, I have managed to find a complete one here in Canada, but the sketches are helpful |
1 Attachment(s)
Is this what you're looking for?
|
Hi George I am looking for a mounting frame.
Larry |
Quote:
# 21 was the later (green painted) version, probably less of a hazard, otherwise identical. All screw threads are Imperial (BSF), the strap tensioner is 5/16-in BSC (British Standard Cycle Thread), which I think is 26 tpi. Taps/dies are available from various model engineering suppliers in the UK. It may be best to make the knurled knuts out of stainless steel rather than painting or electroplating them. Best regards, Chris. |
Threads
Quote:
https://britishfasteners.com/threads-bsc I have also come across British Standard Electrical Conduit threads , mostly used on older electrical fittings. https://www.casa.co.nz/electrics/Con...it-Threads.htm |
All times are GMT +2. The time now is 16:16. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016