MLU FORUM

MLU FORUM (http://www.mapleleafup.net/forums/index.php)
-   For Sale Or Wanted (http://www.mapleleafup.net/forums/forumdisplay.php?f=15)
-   -   Wanted: 25 PDR lunette (http://www.mapleleafup.net/forums/showthread.php?t=31289)

CWO (ret) Gilles Aubé 21-06-20 19:57

25 PDR lunette
 
We are looking for a travelling lunette for one of our 25 pdr MKII.
Gilles

rob love 21-06-20 20:15

https://www.lwdparts.com/product/tra...5pr-field-gun/


I needed a pair of lunnettes for the two guns I picked up, and bought them from the link above. There was a difference in the style of nuts, but the rings themselves were identical to the Canadian version.



If your ring is worn, you can also take the old assembly to a trailer place who can cut the ring off and weld a replacement ring onto the bracket.

Bob Phillips 21-06-20 22:07

I believe I mŕy have one, it has a slightly different plate or bracket just behind the hook or eye. I will see if I can find it a post a photo.
BP

CWO (ret) Gilles Aubé 22-06-20 16:01

25 Pdr Lunette
 
Quote:

Originally Posted by rob love (Post 270361)
https://www.lwdparts.com/product/tra...5pr-field-gun/


I needed a pair of lunnettes for the two guns I picked up, and bought them from the link above. There was a difference in the style of nuts, but the rings themselves were identical to the Canadian version.



If your ring is worn, you can also take the old assembly to a trailer place who can cut the ring off and weld a replacement ring onto the bracket.

Rob, do you remember the cost of transport?
Gilles

CWO (ret) Gilles Aubé 22-06-20 16:03

25 Pdr Lunette
 
Quote:

Originally Posted by Bob Phillips (Post 270365)
I believe I mŕy have one, it has a slightly different plate or bracket just behind the hook or eye. I will see if I can find it a post a photo.
BP

Please let me know if you one or not?
Gilles

rob love 22-06-20 16:53

I think by the time they got here (I had to buy 2) it came out to about $220 total, so each of them came out to about $110 with shipping.

Are you missing one, or is it just worn out? I have my old ones that could be repaired by welding new rings on them, but by the time you did that, you would just about equal the ones at LWD.

CWO (ret) Gilles Aubé 22-06-20 19:09

25 Pdr Lunette
 
ROB It is our original gun that we are pulling for the last 15 years.
I was told not to have it welds because it not good for the hardening of the metal.
Gilles

rob love 22-06-20 19:48

A good welder will know exactly what to do to weld cast....they do it all the time. In the case of cast, you heat the metal to a certain temperature (I think it was around 450°) and use a particular rod. Again, a qualified welder will know all this. If you go to one of the trailer manufacturer/repair places in your neck of the woods, they will know exactly what to do. Just bring the lunette....you don't need to bring the whole gun.

Bob Phillips 25-06-20 20:07

2 Attachment(s)
Here is the pintle I have- very heavy duty- not sure if it the one you need.
overall length about 15 inches, shaft dia about 2.25 inches
Attachment 114750

Attachment 114751

rob love 25-06-20 21:28

I don't think that is 25 pounder...at least not the type I have seen around here.

CWO (ret) Gilles Aubé 25-06-20 22:35

25 Pdr Lunette
 
Sorry for the trouble but it is too big.
Thank you
Gilles

BCA 25-06-20 23:24

Bob, I think your Lunette eye is for the M9 trailer used with G159 Diamond T tank transporter. A handy boat anchor too.


All times are GMT +2. The time now is 10:43.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016