That treadplate floor behind the cab is the right height and width for a FAT too.
|
Quote:
http://s16.postimage.org/qz72n6pkl/F...00_dollars.jpg free image hosting |
I was poking around on Kijiji Barrie and found this:
http://barrie.kijiji.ca/c-cars-vehic...AdIdZ352387754 Certainly a very modified Chev with a high price tag. Any of the lifting gear look original? Colin |
Hummmmm
This has been up before....... probably good parts from the frame down but for $4500 way too expensive for a rolling chassis.
Bob |
Quote:
Quote:
|
1942 Chev, running on Kijiji
Just saw this ad on Kijiji Ontario...1942 CMP running..$1500
Ad ID 367263085 Dean No connection with the seller |
I saw that ad last night. Looks like a much modified HUP (at least the cab) and the owner admits to frame damage without showing photo of the rear half of the frame. I would want to know (much) more before paying his asking....
|
C8a huw
Grant -
I would say it is a C8A chassis as well - re the 6 stud wheels. It was a HUW judging from the cab divider still present. The wood wheel and individual round instruments dates it as a 1943 or later. If anyone ( Rob Clarke ?? ) goes to check it out would they please take a picture of the data plate or at least record the info from it. Thanks. Link to the Kijiji ad: http://ottawa.kijiji.ca/c-cars-vehicles-classic-cars-1942-Chevrolet-CMP-army-truck-W0QQAdIdZ367263085 |
C15-A "Tow Truck for sale in Toronto
Look at what just went up on Kijiji
http://toronto.kijiji.ca/c-cars-vehi...AdIdZ373256024 .... and it sports the fresh coat of snow we just got this morning..... ...but for $3000.....? but it is a movie icon now !!!!! Bob PS.... maybe they need the cash to finish the movie !!!! |
Those movie guys must be smoking some good stuff in T.O.... :smoker:
May be worth $100... |
If the power train is good.......
.....axles, tranny , T case, bellhousing. rims, possible good frame... I would consider $300..... and get 150 for the reamining scrap value.....
The problem is $200 to bring it home....... Buyer Bob |
C15-A "Tow Truck for sale in Toronto
Well that converted C15-A that was used in the movie "Still Seas" is for sale
They had it running by attaching an external fuel tank. It has all the gauges in the cab ect..good as a project or for parts ( I guess) If anyone is interested send me an email at northman@rogers.com and I will forward photos and contact info...too much work for me to buy this! There are some photos of this truck on another thread about this truck being crushed,,it didn't happen Dean |
|
261 chev six on Kijiji
|
military Vehicle CMP
As advertised on Kijiji #359245678
Ford CMP, PTO winch $2500 I believe that is may be a cut up FAT judging by the size of the rims and the winch. No affiliation with the seller. |
kijiji flatheads
on Kijiji;
#375815401 3 flathead motors $250 or 3 for $600 Two appears to have RCEME rebuild data tags and are early flatheads (37-41) also #369611923 running flathead Appears to me to be the middle flathead (42-48) and has Made in Canada on the heads, 21 stud $1500 No affiliations with the sellers. |
1942 CMP Ford 15 cwt on Kijiji Calgary
1942 cab 13 Ford 15 cwt in Crossfield, Alberta
http://calgary.kijiji.ca/c-cars-vehi...AdIdZ385538883 seller: Quote:
|
It is a nice truck. Sold out of BC last year or so. Wonder if it has all the spares?
|
1941 CMP Ford F15A on Kijiji Guelph, Ontario
1941 cab 12 Ford F15A
http://guelph.kijiji.ca/c-cars-vehic...AdIdZ390518635 seller: Quote:
|
HUP on Kijiji
Found this on Kijiji, appears to be whats left of a HUP
http://ontario.kijiji.ca/c-cars-vehi...AdIdZ405979143 |
The data plate says HUM so Heavy Utility Machinery.
|
Hummmmmmmmm
Depends on price.... rims look good.... power train...frame.... inner rear axle shafts...special HUP front end.... possibly good sheet metal nose....
Minus.....door hinges...fenders bobbed.....no running boards... how much was done to frame for "expanded box" ...... seats??? dog house??? original rad???? Claims to have run recently...... not to far to recover..... ...at the vary least a good parts donor.... ....and Chris has not even looked at it yet ????? Bob |
Photos....
5 Attachment(s)
Quote:
I wish I could do smthing for this... |
Gas Can for sale
Spotted this on Kingston Kijiji. Can is in nice shape (not a jerry can) He wants $50 for it but I dont have a clue what they are worth.
http://kingston.kijiji.ca/c-buy-and-...AdIdZ417023528 |
Looks good....
Officially a CMP POW can.... ( Petrol-Oil-Water ). $50 is about the going price if condition is good.
Not a bad price if someone from the Kinsgston area can pick it up with no shipping cost. |
Dodge training manuals for WWII mechanics
|
This popped up on Kijiji south of Ottawa
http://ontario.kijiji.ca/c-ViewAd?Ad...n=email_alerts
just in case, someone is looking for a project! |
Seen before.....
Near Ottawa.... really clapped out HUP...... at $1500 it is a bit steep for what parts are left..... but then beauty is in the eye of the beholder.
Bob |
235 chev engine...running.
Posted on Kijiji
http://toronto.kijiji.ca/c-cars-vehi...AdIdZ431600868 No connection to the seller. Bob |
looks clean..ive had a few of the 60-62 chevs..they are a nice truck to own and work on..i have a 60 gmc 930 thats waiting for my attention in the yard here..but its a factory 283..not that common in a Canadian truck.
|
All times are GMT +2. The time now is 12:06. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016