|
Re: Re: sharp
Quote:
Mvg. Dirk http://212.79.246.244/5800/home.nsf/FordTruck.jpg |
Re: Re: Re: sharp
Quote:
the pre-1942 model number of this truck: C010QF ! Mvg. Dirk http://212.79.246.244/5800/home.nsf/SpringF60H.jpg |
Real good work, Dirk and Stefan.
Alex |
1 Attachment(s)
Quote:
See you in Beltring. Mvg. Dirk http://212.79.246.244/5800/home.nsf/FrontAxle1.jpg |
2 Attachment(s)
Finally I got some more work done on the FORD. The rear bogie assembly is back in one piece now.
Lots of heavy metal! Cheers, Stefan |
Re: one more
1 Attachment(s)
Quote:
Dirk http://212.79.246.244/5800/home.nsf/F60Hg.jpg http://212.79.246.244/5800/home.nsf/F60Hh.jpg |
what a fantastic job you are doing of the old girl. :)
|
Tyre day
Quote:
The missing 2 tyres where arrived last week, nice job from Steven. You know, we like "Chinese Food" but now also "Chinese Tyres". Dirk http://212.79.246.244/5800/home.nsf/TyreDay1.jpg http://212.79.246.244/5800/home.nsf/TyreDay2.jpg |
Transfer Case, F60H
1 Attachment(s)
Before & After of the TC, Steven's favourite job is
coming, closer and closer. Dirk http://212.79.246.244/5800/home.nsf/TCFord60Ha.jpg http://212.79.246.244/5800/home.nsf/TCFord60H.jpg |
Nice job guys.......
Did you take it apart to overhaul/insoect or just cleaned it up...???
On looking back at some of the frame picture it seems that both the front and rear driven axle are GM.....???? but it is a Ford. Pardon my ignorance I am trying to learn.... are all FORD F60 built with GM axles......?? do you know if it has the complex larger R-Zeppa inner U joint..? Dirk... would it be possible to post a close up of the front axle..... curious to see the reenforcement ribs and it seems the front cover is welded in place and not bolted.....? Thanks for your help BooBee |
Found part of my answer.....
By scrolling backward I found a dirty and a clean picture of the front axle.
So I still have this nagging question..... the front axle looks very similar the the heavy duty cast GM axle I have seen on CGT and some Ford gun tractor and even on some odd ball F15a and C15a...... Who made that axle..... Ford or GM......? The one pictured in this thread looks as if the flange that attaches the eggcup is also small like a C15a...... Reminds me of the two C60 we saw at Angus' yard that were Aussie contracts (Sept 44) but built with C15a small flange and with 16 inch tires.....Duh!!!! I wont sleep tonite!!!!!! BooBee |
GM front axles
There were a number of cab 11 Fords built with GM front axles due to the Ford version not being available initially.
|
Quote:
Cheers and thanks for your interest! Stefan |
Re: Transfer Case, F60H
1 Attachment(s)
Stefan Leegwater.......now it is showtime......
============================================= Nice to have company from junior, he like the "Chinese" tyres. Dirk http://212.79.246.244/5800/home.nsf/FordFGTa.jpg http://212.79.246.244/5800/home.nsf/FordFGTb.jpg |
What a wonderful picture.......
That should be featured in a CMP Calendar........
........ nice job on the truck Stefan...... ...and nice job on the good looking boy....... Bob |
Re: What a wonderful picture.......
3 Attachment(s)
Quote:
The restauration of the F60H is still (slowly) going on. Mvg. Dirk |
1 Attachment(s)
Quote:
Dirk |
F60h
Looks wonderful Dirk! Any more pictures?
Quote:
|
very nice work
dirk and stefan best wisches for 2011 and keep up the very nice work your doing on the ford F60H. a very nice truck it has become allready.
the cab 11 is taking shape nicely. :thup2: cheers jaap |
Dirk, Stefan,
Good to see that the cab is coming along after the bad luck engine wise. Alex |
4 Attachment(s)
Quote:
The old design cab 11 (cab), took us lots of more "restoring" time. The new design cab 13 (cab) is much easyer to do,..........I think. Dirk |
I must say Dirk & Stefan, very impressive rebuild (almost up to my standards !). Joking aside, I look forward to seeing the end result
Regards Keith |
2 Attachment(s)
Quote:
Dirk |
What Paint are you using
Hi Dirk
What paint are you using? From your photos it looks like a good match to the unexposed paint I've been uncovering on my HUP which I'm overhauling and plan to paint this spring. My problem is that I have not found a good color match to a current paint. Last batch I had mixed was back in 1992 and when they tried to mix it by the numbers recently it did not come out the same OD color at all. Cheers Phil |
1 Attachment(s)
To write a story about, working on a CMP "Monkey Face" truck (cab) is
a long story. Maybe a nice discussion in the Kitchener's Bar in Beltring ? Dirk |
Looking good, very good, Dirk!
:thup2: Hanno |
Sweet! The cab really looks nice and straight, like it supposed to be. Well done.
|
Dirk and Stefan
Very nice job - well done :thup2: Can you post a couple more pictures. Brian |
Congratulations :cheers:
Very nice job you are doing and on a rare truck :thup2: |
3 Attachment(s)
Quote:
is, lots of dirt on the beach. The paviljoen owners asked me, where are the Canadian immigrants ? Dirk |
| All times are GMT +2. The time now is 11:08. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © Maple Leaf Up, 2003-2016