MLU FORUM - Wire-3 Fitted For Wireless Box details

Page 3 of 3

Show 30 post(s) from this thread on one page

MLU FORUM (http://www.mapleleafup.net/forums/index.php)

- The Softskin Forum (http://www.mapleleafup.net/forums/forumdisplay.php?f=5)

- - Wire-3 Fitted For Wireless Box details (http://www.mapleleafup.net/forums/showthread.php?t=25984)

Bob Carriere

07-02-18 18:34

So the rise is.....

about 2 1/2 inches in the front and 1/2 inch at the back.......

Will check mine out at the barn this afternoon.

Thanks

Darn metric!!!!!!

Check your PM

Jordan Baker

07-02-18 19:01

I'll be interested to see what your risers look like

Jordan Baker

16-04-20 16:59

3 Attachment(s)

Here are the drawings I did of three of the bins from the Wire-3 FFW truck. These were based off of my best guesses using the available pictures and measurements of the two bins above the wheel wells.

Eric R.

16-04-20 17:38

Those drawings will help immensely when I have to fab up the boxes for mine! Thanks!

Jordan Baker

08-11-23 06:11

1 Attachment(s)

Found this picture from a post on Facebook

Lots of detail to see on the wire3

All times are GMT +2. The time now is 20:20.

Page 3 of 3

Show 30 post(s) from this thread on one page