Seat frames
 

Hey John, I sure you could find a couple of seat frames under my house. I have found a set of Acco rear fair-leads you may adapt for your project. :cheers:

Back into it
 

Hi all, Too long since working on the C15 but got the house to lock up so i can get back to the real job at hand.The base of the cab went on and back into the shed she went.Front nose is on and guards,today i worked on rebushing the compressor as it had a severe oil leak.I found on dissassembly the big end bush had come out and allowed the oil to flow down the oil hole and fill up the crank of the compressor and out the breather.Also the breather wasn't sealed to the pot so i sealed it all up and hopefully it holds oil.Hand brake all done and finishing off the transfer shifter assy.Note the poor old white Chev in the third photo has been robbed of her front diff no more outings for a while. ( Thanks to Euen the fun police)

Restoration updates
 

Hi all Progress photos below.Bobs excellent reco job of dash in the foreground.Note the oil preasure of the one i just got and it has an electronic temp gauge.Feel free to let me know.The new loom was made by Vintage Wiring Looms of Ringwood Paul the owner is the easiest bloke on the planet to deal with nothing is a problem for him.

Interesting about the oil presure and temp
 

Do you have any idea what the cluster with the 60 psi oil pressure and the electric temperature gage came off? That one will work very nicely if you re engine to a 235 or 261. As the later engines have a lot more oil pressure and on the standard gage the needle just sits at top peg. The electric temperature gage will also be interesting as some of the later engines have an electric sensor just under the thermostat at the front of the engine. May take a little playing around to find the correct sender unit or to match/trim the resistance to get a proper reading.

Looks like you are making real good progress.

Cheers Phil

Dash cluster
 

Hi Phill, Not sure what it is out of but today i had the voltage and resistance of fuel and temp gauges tested. 6V and suplied the correct sender unit to suit the gauge.I pulled it apart to clean and paint it,the glass and gauges are like new it will suit the 235 a treat as you say.

John

you are making great progress, thanks for sharing here, can you tell me are those tires X military UNIMOG tires ?, I think most I see are like swiss and European military 10:50x20 ......... how do they work for you ?

I have 9:00x20 NDCC now but always wondred what those tires would look like on it, guess Ill have to wait till your done to see :thup:

Re Tyres
 

Yes they are X military n.o.s 12.00x20 46" tall have not driven it yet i will let you know.

Made It to Corowa
 

Hi All,Sunday night resting up from the best weekend i have ever spent with the nicest group of people you could meet.Yes the Chev was finished good enough to drive her to Corowa on the Friday,In total she did 650klms return trip and all trouble free.On the highway she sat on 90-95klms and the top speed was 105 klms but it felt like she was reving her head off.Total fuel usage was 160 liters which i felt wasn't too bad considering i havn't realy given her a good tune up.Next step is to sort out the tray and fairleads .oh and get some better seat so my bum doesn't burn after the first hour of cruising.Thanks again to all that made our weekend as good as it was we look foreward to getting to know you all better in the near future. John Stokes (Note my crazy neighbor)

Morn John :coffee

Well sounds like a great time was had by All, awesome !

the Blitz looks great, love these tires but I dunno about 105km/h that sounds spookey in a 67 year od truck :eek:

would love to see more pics of your ride and BTW those rear fenders look the part quite well, all you need now is a fifth wheel and you have a Blitz tractor :thup2:

LOL

Rear mud guards
 

Hi terry, you are correct about the 105klm being scarey what if the transfer case flew apart? this did cross my mind she is more happy doing 85-95klm so am i.The rear guards are not staying they were put on for the trip up.The tray i am building will have guards built in.Will be posting more photos later on.John Stokes.

Rear Fair Leads
 

Hi All,
I have been a bit quiet on the restoration side because the rear fair leads have been keeping me occupied.Euen lent me a set of rear fair leads to duplicate,now i know why he didn't want to part with them.Any way almost there and if someone could let me know were the rollers painted or dipped in gal or something?Back in the shed after Monday cruise preparing for some olive paint and finishing off. John Stokes.

On the air
 

I just heard John (VK3HO) on the air 5 mins ago..... he was active on the 40mx ham radio band.

Wonder if he still has the CMP ?

John sold his truck years ago and moved to the country. He runs a engineering machine shop from home now.

Ok
 

Thanks Euan

He said he is up near Eildon... look up VK3HO on Google.